• +60 3 5612 3663
  • enquiry@remi.com.my

INTemp Monitoring Solution

Description

Description:

InTemp ® CX402-TXXX (with Glycol Bottle) data loggers monitor temperatures in refrigerators, freezers and other
temperature-controlled environments to compile with global GDP requirements. The loggers communicate
wirelessly via Bluetooth Low Energy to mobile devices. Using the InTemp app, you can easily view data,
check logger status, set alarms, and create and share secure PDF reports for streamlined reporting and
regulatory compliance. All loggers feature a built-in LCD display to view current and daily min and max
temperatures, advanced audible and visual alarm capabilities for notification of temperature excursions,
an internal sensor for ambient temperature monitoring, and a single point NIST Certification of Calibration
for both the logger body and probe. With the InTemp Gateway app, you can get remote alarm notifications
on your mobile device if an excursion occurs.
Models are available with a 2- or 4-meter external temperature probe attached to a Glycol bottle used to
insulate the probe and delay thermal response times.

Highlighted Features:
▪▪ Easy-to-read display with current and daily min/max temperatures
▪▪ Audible and visual alarms
▪▪ Bluetooth transmission of data and alarm states
▪▪ Logger set up and download of data in seconds – without a PC or cable
▪▪ +/- 0.5C accuracy for reliable temperature readings
▪▪ Battery-powered to guard against local power loss
▪▪ Several Glycol bottle/probe-only options available
▪▪Optional ISO 17025 compliant calibration service (NIST included)



Specifications


Ambient Temperature Sensor Accuracy
±0.5°C from -15° to 70°C (±0.9°F from 5° to 158°F)
±1.0°C from -30° to -15°C (±1.8°F from -22° to 5°F)
Ambient Temperature Sensor Drift
<0.1°C (0.18°F) per year
Ambient Temperature Sensor Range
-30° to 70°C (-22° to 158°F)
Ambient Temperature Sensor Resolution
0.024°C at 25°C (0.04°F at 77°F)
Ambient Temperature Sensor Response Time
15 minutes typical to 90% in air moving 1 m/s
External Temperature Probe Range
-40° to 100°C (-40° to 212°F)
External Temperature Probe Accuracy
±0.5°C from -15° to 80°C (±0.9°F from 5° to 176°F)
±1.0°C from -40° to -15°C (±1.8°F from -40° to 5°F)
±0.7°C from 80° to 100°C (±1.3°F from 176° to 212°F)
External Temperature Probe Cable Length
2 or 4 meter (6.56 or 13.12 feet) flat ribbon cable
External Temperature Probe Dimensions
Food-grade stainless steel probe with pointed tip, 53.34 mm (2.1 inches) long, 3.18 mm (0.125 inches) diameter
External Temperature Probe Drift
<0.1°C (0.18°F) per year
External Temperature Probe NIST Calibration
Single point NIST calibration, probe and logger body
External Temperature Probe Resolution
0.024°C at 25°C (0.04°F at 77°F)
External Temperature Probe Response Time
With 5 mL bottle: 10 minutes typical to 90% in air moving 1 m/s
With 15 mL bottle: 20 minutes typical to 90% in air moving 1 m/s
With 30 mL bottle: 25 minutes typical to 90% in air moving 1 m/s
Logger Battery Life
1 year, typical with logging interval of 1 minute.
Logger Battery Type
Two AAA 1.5 V alkaline or lithium batteries, user replaceable
Logger CE
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
Logger Dimensions
9.4 x 4.5 x 2.59 cm (3.7 x 1.77 x 1.02 inches)
Logger Environmental Rating
IP54
Logger Full Memory Download Time
Approximately 60 seconds; may take longer the farther the device is from the logger
Logger LCD
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Logger Logging Rate
1 second to 18 hours
Logger Memory
128 KB (84,650 measurements, maximum)
Logger Operating Range
-30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
Logger Radio Power
1 mW (0 dBm)
Logger Time Accuracy
±1 minute per month at 25°C (77°F)
Logger Transmission Range
Approximately 30.5 m (100 ft) line-of-sight
Logger Weight
90.2 g (3.18 oz)
Logger Wireless Data Standard
Bluetooth Low Energy (Bluetooth Smart)

ISO 13485: 2003
MDA Establishment Licence
REMI Trade Marks
Heat Enclosure Calibration
By using our website you are consenting to our use of cookies to ensure you get the best experience on our website. Learn more