Powercom Vanguard II UPS 3KVA (3000VA)
Description
• Double conversion online topology with 0.9 power factor.
• Pure sine-wave output with less than 3% of THD.
• Energy-saving functions with high-efficiency mode selectable, free-run mode setting, etc.
• Active-fan operation dependant on load level to reduce noise and save energy
• Complete protections on short circuit, overload, surge and lighting,
telecommunication ports, etc.
• Emergency Power Off (EPO) protection
• Remaining backup time display via LED or LCD (Optiona)
Extended backup time with battery pack
Specifications
- Battery Backup Time
- (100%load) 3 to 4 minutes
- Battery Protection
- Battery low cut-off without draining any current
- Battery quantity
- 12V 7Ah x 8
- Battery Type
- Selaed, maintenance- free lead acid battery
- Battery Typical recharge
- time : 4 hours to 90%
- Capacity
- 3000VA or 2700W
- General Audible noise
- < 50dBA (1m from surface)
- General Communication
- interface Standard- RS-232 (Optional USB B- type and SNMP)
- General Dimension
- 225W x 420Dx 358H (mm)
- General Display (LED/LCD)
- LED- line mode (green), bypass/ battery mode (yellow), fault (red)
LCD- input/ output voltage and frequency, on-line mode, backup mode, battery capacity, load level - General Humidity
- 0-95%, non- condensing
- General Product Weight
- 31.5 kg (69.3 lb)
- General Storage Temp
- -15C to +50°C
- General temperature
- Ambient : +0 °C to +40°C
- Input Frequency
- 50Hz/ 60Hz±2.5Hz auto sensing (45Hz to 65Hz user selectable)
- Input Power factor
- > 0,97
- Input Voltage
- 220V/ 230V/ 240V 120V to 139V under 25% load, 140V to 159V under 50% load, 160V to 179V under 75% load, 180V to 276V with 100% load
- Output Effciency
- Approximately 89%
- Output Frequency
- 50Hz/ 60Hz±0.25%
- Output Harmonic distortion
- <5% of T.H.D at non- linear load; <3% of T.H.D at linear load
- Output Phase
- Single phase
- Output Type of outlets
- Standard IEC outlet. Customized outlet can be discussed.
- Output Voltage
- 220V/230V/ 240V±2% (selectable output voltage)
- Output Waveform
- Pure sine wave
- Protection Alarm
- Buzzer beeps under backup mode, battery low, battery charging fault, and overload
- Protection Overload
- UPS automatic power off if overload exceeds 106% to 120% of nominal at 30 seconds; 121% to 150%
for 10 seconds - Protection Short circuit
- UPS output cut off immediately or protected by input fuse or circuit breaker
- Protection Tele-communication
- RJ45 X 2
